The polyphonic spectral separation, used for the first time in a transient shaper, allows the envelope of each polyphonic 'note' to be processed according to its own time base, even in polyphonic audio material, without affecting other sounding notes.
Listen to examples...
There are even intelligent transient shaper plugins that analyze and process frequencies in innovative ways! Transient shaping is also a “secret weapon” mixing approach used by some of the world’s top engineers and producers. It is a must-have dynamics effect processor for shaping sounds, controlling presence, and fixing recording problems. Transient Processing is a very easy and powerful technique that is often overlooked. It's very simple but can be a better option than compression for many si.
The Transient Artist
- Transient-Shaper, Dynamics. Download at manufacturer site. Bittersweet v3 is a free software processing tool for managing audio transients. Turning the big wheel button on the sweet side, decreases the transients amplitude. On the bitter side the transients amplitude is magnified. Bittersweet v3 is built around our latest 64-bit version 3.
- VST Transient is a transient-driven signal shaper that allows you to adjust the attack and sustain portions of the peaks in your audio signal. It works by detecting rapid changes in the incoming signal regardless of its amplitude level. Enhance your percussive.
- This free plugin is a wildly popular choice for both beginner and advanced producers looking for simple, no-nonsense transient processing. Bittersweet’s engine is incredibly easy to use, with a large, central knob allowing you to dial between “sweet” and “bitter” transients.
- VST Transpire is a transient processor. It can enhance or dampen the initial attack and the sustain (body) of sound. Transpire has been designed to work well with drums and percussion.
- Im running FL studio and it does not seem to have a native transient shaper. I have messed around with some different forms of compression and tried some wave shaping but not really getting what im looking for, so if there are any good NATIVE plugins for fl 11 i can use great, but if not, what in your opinion are some good free ones?
With atomictransient, your audio sources and samples match the mix perfectly:
- Change dynamics of recordings, samples and existing loops
- Use atomictransient for percussion patterns, but also for instruments or loops/mix patterns
- Adjust the complete temporal envelope of existing audio material
- Separate, accentuate or remove drum hits from loops or patterns
- Simulate piano pedals, change the guitar attack, or reshape the envelope of a synthesizer sample. Each note is adjusted in its own time domain
Integration
Use atomictransient in of your DAW for any type of track as needed.
Regardless of whether you use it for drum patterns, loops from your DAW library, polyphonic instrument recordings or midi instruments. You can also easily edit existing mixes.
atomictransient works with any audio material that contains transients/beats!
'You can work with polyphonic material in a way
that I haven't realized will be possible before'(Sonicstate, übersetzt)
Multichannel / Mixer
atomictransient provides up to three parallel processing channels. Each channel can detect and process transients in its own frequency range and uses different effects on the audio signal.
The detection of transients per channel can be limited by a spectral filter to a specific frequency band, so that a transient is triggered only for chosen audio material.
The effect outputs can be mixed to defined frequency ranges - parameters control the amount of effect and original signal.
Polyphony
In addition to working across the entire frequency spectrum or processing drum patterns, atomictransient 'understands' polyphonic audio signals such as pianos, guitars or mixes with various instruments.
A special analysis separates the audio introduced by transients according to their spectral components. Thus, the polyphonic mode uses the characteristics of a signal to apply the selected effect to relevant spectral ranges after a transient or new sound has occurred.
Polyphonic audio material such as piano, guitar or mix-downs can therefore be processed 'polyphonically', so that already sounding tones are not affected by new tones and effect processing is performed separately for each tone or note. This is comparable to the selective modification of overlapping 'notes' of an instrument or track.
atomictransient allows, for example, only bass instrument, base drum, snare or hi-hat to be nearly removed, separated, sustain added or attack changed. This way, piano pedals can be simulated, guitar strokes changed or the envelope of a synthesizer sample reshaped. Each note is adjusted in its own temporal progression.
Effects
As soon as a transient is detected, atomictransient 'triggers' the processing of this transient sound and all spectral components associated with it. A triggered transient results in the processing of the audio signal by an effect that starts at the moment of the triggering event.
The built-in effects allow a variety of settings to control the effect used by the transient processing for each channel. There are currently two effects available - 'Envelope Response' and 'LFO Filter'.
The 'Envelope Response' controls the amplitude over time, changing the signal 'dynamically' (relative to the current amplitude and time) or 'statically' (independent of the current amplitude). This enables a precise adjustment of drum lines by changing attack and sustain, and also gives instruments a new character by changing the entire envelope..
The Filter effect dynamically modifies frequency ranges via timed LFOs. By adjusting the resonance, a typical concise character can be given to the sound.
Interactive live displays
atomictransient features several live displays:
- The spectral display is mainly used to check and control the triggers
- The time-based 'waterfall diagram' shows a historical representation of all transients, channel and signal information and is used to control the effect response
- The Live Display of the Envelope effect shows the amplitude of the current signal with input and output level modification. In order to adjust the envelope optimally, atomictransient extracts a visual representation of the real amplitude response of the current signal
And even more...
More than 160 presets offer enough possibilities to get started right away. The presets are specially grouped for different types of audio material such as drum patterns, instrument loops and mixes and also contain a number of sets of effect, timing and filter presets.
Two different 'listen' functions support the optimal setting of parameters - once activated, only the output of the transient detection is audible to check the filter settings of the transient trigger or the output of the current effect.
atomictransient supports even common parameters like dry/wet, gain and dynamicautomatic gain. The A/B program comparison and preset copy & paste simplifies preset creation. Presets can be exported or imported as XML text either completely or per setting category. Undo and Redo make it easy to navigate through changes you made.
Using the integrated MIDI-learn function, parameters can be assigned to MIDI controllers via your host-software.
For optimal usability atomictransient also supports a scalable user interface and two different designs.
.
Standalone application (Windows)
For Windows-Systems a standalone application is included to use atomictransient directly as a dynamic-effect through your audio-hardware.
Demosamples:
All examples were created with atomictransient as a single track within a DAW (other plug-ins used are listed in the description of the respective example). The examples contain the original (dry) followed by several edited parts (wet) using different presets / settings.
To listen to the sample sounds click on the speaker icon...
Neutrino is a free plug-in that offers a glimpse into iZotope’s newest mixing technology. Insert Neutrino on multiple tracks across your session to reveal a subtle amount of detail that can help elevate great mixes to a new level of refinement.
Based on iZotope’s Spectral Shaping technology, Neutrino listens to your audio and provides subtle, real-time adjustments based on perceptual hearing models to reduce momentary unevenness in a signal transparently, in a way that conventional equalizers and compressors cannot. With simple controls and low-CPU usage, you can put it on every track in your session and achieve better-balanced mixes without sacrificing dynamics and sonic integrity. Best of all, it’s free to download, and easy to use.
Features
- Clarity across the board: Ultra efficient and designed to add unprecedented balance and focus to a mix when applied to every track, conceptually similar to analog summing or console emulations.
- Four modes for tailored response: Voices have a completely different sonic character, dynamic range, and frequency response than drums, bass, and other instruments. Shouldn’t your processing take that into account?
- Voice Mode focuses processing on mid and high frequencies for adding clarity and detail that helps vocals sit on top of the mix without becoming harsh or strident.
- Instrument Mode smoothes resonant frequencies while preserving the authentic character of the instrument.
- Bass Mode is designed to attenuate notes that stick out while adding punch and weight to electric, acoustic, and synth basses.
- Drum Mode emphasizes transient detail across the spectrum while minimizing frequency build-ups that can sound “muddy” or “flabby.”
- Simple controls: Tweak just two knobs to dial in the appropriate processing amount and detail for your music.
System Requirements
Supported operating systems
- Windows: 7, 8, and 10
- Mac: OS X 10.9–10.11
Transient Master Vst Free
Plug-in formats
- VST 2 (32-bit and 64-bit), VST 3 (32-bit and 64-bit), Audio Unit (32-bit and 64-bit), AAX (64-bit), RTAS (32-bit), Audiosuite DPM and AAX.
Free Transient Processor Vst Download
Plug-in host compatibility
Best Transient Designer Plugin
- Logic Pro X.2, Ableton Live 9.5, Pro Tools 12.4, Pro Tools 11.3.1, Cubase Pro 8.5, REAPER 5.11, FL Studio 12.2, Studio One 3.1.1, Pro Tools 10.3.1.
Comments are closed.